BUYER SUPPORT / FIRST ORDER
Compare factory quotes on the same resin line
FREE review of product, quantity, destination and sourcing requirements
Eligible first orders may receive up to 3%
Eligibility applies to qualified business buyers and is confirmed after we review your product, quantity, destination, and sourcing requirements. Final figures depend on supplier confirmation, product type and order value. This is not a discount, lowest-price, or today-only offer.
An application fixes duty—film, blow molding, injection, or sheet extrusion—not a promised output rate. For polyethylene resin manufacturers, the application usually locks process grade and whether the color and additive package must be named. Density in g/cc, if used to distinguish grade, comes from the buyer’s drawing or incoming-inspection method, not from a catalogue reprint on this site.
What stays open after the use is described: pigment, optional PCR wording, packing and the named ASTM or equivalent method. Those remain buyer decisions until a supplier confirms the quoted line.
Film, blow, extrusion or injection. Melt flow index (MFI / MFR g/10 min) and melt temperature (Tm) are acceptance questions only if the drawing names them.
| Ask | Unit |
|---|---|
| Process | film / blow / extrusion / injection |
| Melt-flow ask | g/10 min the factory confirms |
| Density if used | g/cc |
Natural versus pigmented, UV stabilizer / HALS, antioxidant package. Heat deflection temperature (HDT) belongs on the offer if it is a gate—not as a decorative range.
| Ask | Why |
|---|---|
| Color package | Pigment can shift density |
| UV / HALS | Outdoor film or pipe-adjacent duty |
| Antioxidant | Regrind or long residence time |
This desk does not host STEP files. Describe the revision in the requirements box. After contact, drawings can be sent by the buyer’s own channel.
Send the open axesBuyers sometimes reach for PC, PA or PEEK because a datasheet looks safer. That is a different polymer family. Commodity PE stays on the line when HDT, flame class and impact gates are not on the drawing. The table is a purchase check, not a claimed service result. PCR versus virgin is a separate decision: the buyer writes any recycled-content percentage if the receiving plant requires it, while medical, infant-formula and high-spec electrical teams still ask for virgin or a chemically recycled statement.
| Check | Stay on commodity PE | Move the brief off this family |
|---|---|---|
| Duty | Film, bottles, non-structural housings | 150°C+ HDT, V-0, or solvent service |
| Axes named | Density in g/cc and melt-flow ask | HDT, UL 94, or chemical list |
| Thermal gate | Often none | Named HDT or continuous temperature |
| PCR wording | Buyer writes the percentage if required | Virgin-only or r-ISCC PLUS if the plant demands it |
| Evidence | Grade, color, named ASTM method | Engineering resin family on another brief |
We will not invent a density in g/cc or a kg/h output to complete the brief.